Digitally cleans the video signal / removes unwanted distortion in video signal, stabilises picture quality and luminance fluctuations, improves picture quality on LCD monitors or projectors. S-video and composite video in- and output (it is impossible to use S-video and composite video signals simultaneously). LED indication when distorted video signal detected. For PAL / NTSC video.Warning: only use the K8036 to back up original video material of which you are the rightful owner (DVD, VHS, VCD, ...) check copyright information of the original material.
No longer available
Dimmer to be used in our K8006 home light system, suitable for incandescent lamps, mains voltage halogen lighting and low voltage halogen lighting in combination with a conventional (wire wound) transformer. Easy pushbutton operation: a brief push toggles on/off, while continued pushing engages dimming action. Non volatile memory for last set light intensity. Lots of safety features to make lamps last longer, such as "soft-start" and automatic deactivation after 12 hours or after 20 min at insufficient intensity. Transformer protection in case of defective light sources, LED status indication.
No Longer Available
Add an LCD display to any low-tech application and make it look high-tech ! Replace up to 9 indicators or lamps by one single backlit LCD, recall messages simply by pressing a button, inputs accept dry contacts, open collectors and logic levels. No programming skills required ! Store up to 9 sixteen-character messages in non-volatile EEPROM memory. 4 operating modes: 1): display the status of all inputs simultaneously 2): display all active inputs 3): display active input with highest priority 4): display text messages in a 'tickertape'-fashion. A default message can be displayed to signal that no inputs are active messages can be transferred to the K8045 from any PC or terminal. Wireless data transfer between PC/terminal and K8045 is possible with optional RX/TX433 modules. 1 on-board push button is available for an application of your choice.
An infra red receiver kit which works together with K6710, K8049, K8051, K8055, K8056, K6714, K6714-16, K2633. 15 open collector contacts: max. 50V/50mA, LED indication for each output, multiple IR sensors possible (type : IR38DM)
Two relay contact outputs with toggle or pulse function selectable per output. Pulse function with turn off timer. Can learn a unique 32-bit code from the K8059 and VM108 transmitters, store up to 31 transmitters. No hardware settings required, full software control. Code memory can be erased for safety purposes. LED indicators for outputs and functions. Special function in pulse mode: both outputs can be set simultaneously when the two transmitter buttons are pressed at the same time. Suitable for various control applications e.g. garage door, door to your home, lights, car...