Velleman Kits & Projects

Hand held remote control and codelock transmitter. 4 channels under your thumb!

This receiver module in combination with a transmitter (VMB4TX) makes it possible to remotely control devices connected to the Velbus. Thanks to the unique code of the transmitter (more than 1.000.000.000 possible) the remote control can also be used to control garage ports, electrical fences, door locks, etc...

The Velbus VMB4RY is a four channel relay which has been designed to switch resistive or inductive loads. It has suppressed voltage free relay contacts. The VMB4RY module features manual override control, can be controlled be several push buttons connected in parallel and can interface with the Velbus Home Automation System. VMB1RM has 16 possible time settings: moment - 5s - 10s - 15s - 30s - 1min - 2 min - 5min - 10min - 15min - 30min - 1h - 2h - 5h - 1day - on/off and 9 possible time settings for timer 2: 5min - 10min - 15min - 30min - 1h - 2h - 5h - 1day - on/off. The device can be programmed with or without the aid of a PC, using a unique simple learning process. All settings are stored and will not be lost in the event of a power failure. There are up to 224 possible address for each module, indication of output status (On/Off), power and data are displayed on LED's

Hand held remote control and codelock transmitter. 4 channels under your thumb!

The Velbus VMB6IN has 6 separate inputs designed to be connect to push buttons, door or window contacts, movement detectors relay contacts, open collector outputs to the Velbus Home Automation System. The contacts can be located a long distance from the module. Each channel has an LED indicator which gives you the channel response time for the contact or switch setting. Four modes are available indicated by a very fast blinking LED 65ms, fast blinking 1s, slow blinking 2s and continuously on 3s

The Velbus VMB8PB can be used to connect up to 8 push buttons to the Velbus Home Automation System. Push button reaction time is selectable between 65ms, 1s, 2s and 3s. It is also possible to place an LED indicator in parallel with the push button.

The Velbus 1-channel 200W dimmer suitable for halogen lamps and lamps connected using an electronic transformer. Create an atmosphere which suits you best or let your lights dim slowly to avoid unexpected surprises. It is also possible to simulate a sunrise which makes waking up a lot more pleasant! Additional software to up grade and improve this product is available from the Velleman support section on there website.

The Velbus VMBRGBDC is 3-channel 5A-12V/24V LED dimmer for dimming LED strips. Create an atmosphere which suits you best or let your lights dim slowly to avoid unexpected surprises. It is also possible to simulate a sunrise which makes waking up a lot more pleasant! Additional software to up grade and improve this product is available from the Velleman support section on there website.

This compact Panel PC is pre-installed with the Home Centre application by Stijnen solutions . This client-server software is completely self configurable. The software scans your Velbus system and creates an instant easy to use touch control system with feedback indication. Place control icons, background pictures, control dimmers, lights, blinds, heating... Auto configuration of multi-use buttons (macro’s) to create moods, all off, night mode... Using a network/Wi-Fi it is possible to connect other client PC’s. Even use the internet to remotely check you home.