Velleman Kits & Projects

This 2-Channel RF Remote Control is compatible with K8057, VM130, VM130N and VM151.
This is module is a redesigned version of the VM130T and features a white LED torch function.

Dimming electronic transformers impossible? Not if you have this unit ! A processor controlled circuit outputs a wave form that is suited for most dimmable electronic transformers. Can also be used for direct mains voltage lamps.

This board can program a wide range of Microchip® PIC™ microcontrollers. Suitable for the programming of the VM142 mini PLC microcontroller and currently supported controllers:- PIC10F200, PIC12C508A, PIC12CE518, PIC12F629, PIC12F675, PIC16F54, PIC16F84A, PIC16F870, PIC16F871, PIC16F872, PIC16F873, PIC16F874, PIC16F876, PIC16F877, PIC16F627, PIC16F627A, PIC16F628, PIC16F628A, PIC16F648A,  PIC16F630, PIC16F676 and PIC18F2550

Microcontroller circuit, fit for light bulbs and mains halogen lamps. Install the module behind the existing switch, ceiling rose or inside lamp and you're done!

Power up to two 3W high-power LED's (not incl.)

Simply connect in parallel with phone line. Powerful led flashes when phone rings. The unit will feature a relay output if connected to a 12VDC power supply.

Digital Panel Thermometer with Min/Max Read Out

This module is based on K8088 has been designed to control LED's for display advertising and light effects. The three outputs drive high power Mosfet's which can each sink about 3A. Many sequences can be selected with varying speeds and fade times.

A small panel mounted thermostat with LED indication, uses 3-wire sensor for accurate indication and control of temperature. Suitable for controlling room or incubator temperatures. Features: general purpose panel mount thermostat, usable for heating or cooling purposes, (central heating, airco, incubator,… ), separate output-ON and output-OFF setting (hysteresis), direct manual temperature adjustment, bright red LED read-out, comes with easy board-to-wire connectors and sensor (20cm wire), calibrate option, under- and overflow indication

Mains operated timer, suited for turning on an extractor fan and allowing to run for approx 3 minutes or switching off after 7-15 minutes after the mains power has been removed. Other uses could include operation outside lighting or security applications.