Velleman Kits & Projects

Christmas has never been this cosy !, with this ready built Christmas Tree. 16 blinking red LED's.

Animated Xmas gadget with 126 multicoloured LED's. No need to remove battery when using external supply. 12V operation possible for use in cars, lorries, trucks. With on/off switch.

2MHz USB PC Function Generator. The PCGU1000 is a digital function generator which can be connected with a PC via USB.
Standard signal waves like e.g. sine, triangle and rectangle are available; other sine waves can be easily created.
The signal waves are created in the PC and produced by the function generator via DDS (Direct Digital wave Synthesis) Frequencies up to 2MHz. Features 2 equal outputs and a TTL Sync output. Output voltage of 1mVtt up to 10Vtt at 600 ohms. All outputs are galvanically separated from the PC in order to avoid measuring problems. Comes with power adapter.

Record DC or slow moving signals over very long periods with this 4 channel signal recorder. Signals are instantly displayed on your PC screen using an analogue or DVM display and all your measurements are automatically stored on your hard disk for further processing. Thanks to the USB connection no power supply is necessary and installation is easy and straightforward!

Record DC signals or slow-moving signals over very long periods. The measurements are automatically stored on your hard disk for further processing, thanks to the USB connection no power supply is necessary and installation is easy and straightforward. Signals are instantly displayed on the PC screen using an analogue or DVM display, USB cable and PC-LAB2000 Software included.

The PCS100 is a digital storage oscilloscope, using a computer and its monitor to display waveforms. All standard oscilloscope functions are available in the Windows program supplied. Its operation is just like a normal oscilloscope. Connection is through the computer's parallel port, the scope is completely optically isolated from the computer port. Supplied with one insulated probe x1/x10 (126-060)

The PCS500A is a digital storage oscilloscope that uses a computer and its monitor to display waveforms. All standard oscilloscope functions are available through the supplied Windows program. Its operation is identical to that of normal oscilloscope apart from the fact that all operations can be performed with the mouse. Connection is through the computer's parallel port and the scope is completely optically isolated from the computer port. The oscilloscope and transient recorder have two completely separated channels with a sampling frequency up to 1GHz. Any waveform displayed on the screen can be stored for later use in documents or for the comparison of waveforms.

Feature-packed PcLab2000-LT software for two channel oscilloscope, spectrum analyser, recorder, function generator and bode plotter. With the generator, you can create your own waveforms using the integrated signal wave editor. For automated measurements, it is even possible to generate wave sequences, using file or computer RS232 input.

The Velleman PCSU01 is a small and easy to use oscilloscope with all the features of a full blown oscilloscope. Complete with instructions (download), test leads and software (download) and it comes in a design enclosure.

The PCSU1000 digital storage oscilloscope uses the power of your PC to visualize electrical signals. Its high sensitive display resolution, down to 0.15mV, combined with a high bandwidth and a sampling frequency of up to 1GHz are giving this unit all the power you need. The USB connection makes this unit a snap to set-up, no external power required! In the field measurements using a lap-top computer have never been this easy. This scope comes in a stylish vertical space saving design. Powerful software will fulfill all your needs, but for those who like a challenge; a DLL is supplied, which allows you to create your own application.