Velbus Dimmer Module for Electronic/Resistive Loads VMBDME

Velleman
VMBDME
5410329442637
    No Stock
  • Description
  • More Details

No Longer Available

The Velbus 1-channel 200W dimmer suitable for halogen lamps and lamps connected using an electronic transformer. Create an atmosphere which suits you best or let your lights dim slowly to avoid unexpected surprises. It is also possible to simulate a sunrise which makes waking up a lot more pleasant! Additional software to up grade and improve this product is available from the Velleman support section on there website.

Features

  • Noiseless through CoolMOS™ FET
  • mains pollution (EMI) conform EN55015
  • Built-in non-resettable fuse
  • gradual switch on or off a. will prolong the lamp's life
  • manual control on the module
  • control through VELBUS
  • programmable without PC
  • 16 possible time set-ups: momentary - 5s - 10s - 15s - 30s - 1min - 2 min - 5min - 10min - 15min - 30min - 1u - 2u - 5u - 1day - on/off
  • controllable by connecting several push buttons in parallel
  • easy learning process
  • storage space for 16 different push buttons
  • learned push buttons are saved in case of a power failure
  • report to control modules
  • LED indicators for:
    • operation modes
    • power voltage
    • data reception and forwarding through VELBUS
  • operation modes :
    • moment control
    • start/stop timer
    • staircase lighting timer
    • dimmer
    • dimmer with memory function
    • multi-position dimmer
    • slow-on dimmer
    • slow-off dimmer
    • slow on-off dimmer
  • control possibilities:
    • push buttons turning on the lamp to full intensity
    • push buttons turning the lamp off
    • push buttons turning on the lamp to full intensity or turning off the lamp
    • push buttons activating the set operation mode
    • push buttons increasing the lamp's light intensity
    • push buttons decreasing the lamp's light intensity
    • push buttons creating atmospheric lighting
    • push buttons turning on the lamp on the desired intensity.

Specifications

  • power supply: 12VDC...18VDC
  • consumption: 40mA
  • required mains voltage: 100-125V/60Hz or 220-240V/50Hz
  • maximum load:
    • 200W @ 230V or 100W @ 115V
  • dimming from 0 to 100% in ca. 4 seconds
  • 248 possible addresses
  • push button input debounce: 65ms
  • standard DIN-rail housing: 2 modules
  • dimensions: 90 x 36 x 58mm / 3.5 x 1.4 x 2.3"
  • weight: 95g (0.21lbs)

    Manual

    Catalogue

    Software

__ifPurchasable__
__endifPurchasable__