Handheld LCD Osciloscope Kit

    No Stock
  • Description
  • More Details
  • Specifications

No Longer available

This handheld scope features options never seen in its category. It is packed with handy features which enables you to perform on-the-spot measurements quick, easy and accurate. Its high-contrast, wide viewing angle LCD screen enables operation under normal daylight conditions. All functions are accessible by means of a tactile keyboard with a pleasant touch feeling. The current operating mode is displayed on-screen. If desired, auto-setup mode takes care of all scope settings for instant visualisation of waveforms. The marker function enables you to make accurate measurements of voltage, time and frequency. Acting as a DVM, it displays True RMS, dB, peak-to-peak and DC volts. With its built-in variable gain sine generator, it allows easy service of audio equipment, etc.… Probe transient response can be adjusted using the calibration output. Finally, a RS232 port enables screen data to be sent to a PC for use in different applications. A charge circuit with indicator LED for rechargeable batteries is provided.
  • maximum sample rate for repetitive signals: 5MHz
  • maximum sample rate for single shot events: 0.5MHz
  • input impedance: 1Mohm // 20pF
  • maximum input voltage: 100Vp (AC + DC)
  • input coupling: DC, AC and GND
  • vertical resolution: 8 bit (6 bits displayed on LCD)
  • dB range: -73dB to +40dB
  • linearity: 1 bit (of 8 bit data)
  • LCD: 64 x 128 pixels
  • timebase: 2µs to 20s / div in 22 steps
  • input sensitivity: 5mV to 20V / div in 12 steps
  • sinewave generator: 400Hz / 1Vrms // 1Kohm (adjustable)
  • square wave output: 400Hz 3.5Vpp
  • power supply: 9VDC / 300mA
  • rechargeable battery: 6 x type AA / 800mAh
  • charging current: 90mA
  • charging time: 14 hours
  • autonomy: 5 hours
  • operating temperature: 0 to 50°C (32 to 122°F)

    Click to open
  • Dimensions: 130 x 230 x 43mm
    Power Supply: 9Vdc / 300mA