arduino

Arduino

Official UK Stockist of Arduino Boards, Shields & Accessories.

We also carry the full range of Velleman Arduino-Compatible Boards, Shields and Interfaces. Now including a specialist series of sensors and converters.

!

Arduino is an open-source electronics platform based on easy-to-use hardware and software. It's intended for anyone making interactive projects.

All Arduino branded items are Genuine Arduino products.

!
Arduino®
1-5 Days
A000004

Arduino USB Host Shield A000004

   Module: Pre-assembled
The Arduino USB Host Shield allows you to connect an USB device to your Arduino. The Arduino USB Host Shield allows you to connect an USB device to your Arduino board. The Arduino USB Host Shield is based on the MAX3421E (datasheet), which is an USB peripheral/host controller contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0.The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board. The following device classes are supported by the shield: HID devices, such as keyboards, mice, joysticks, etc.
Arduino®
1-5 Days
A000005

Arduino Nano A000005

Web offer Price
   Module: Pre-assembled
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
Arduino®
1-5 Days
A000008

Arduino YÚN A000008

Web Offer Price
   Module: Pre-assembled
The Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWrt named OpenWrt-Yun. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons.

The Yún distinguishes itself from other Arduino boards in that it can communicate with the Linux distribution onboard, offering a powerful networked computer with the ease of Arduino. In addition to Linux commands like cURL, you can write your own shell and python scripts for robust interactions.

The Yún is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Yún to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

Arduino®
1-5 Days
A000014

Arduino USB/Serial converter with Headers A000014

Web Offer Price
   Module: Pre-assembled
This board converts a USB connection to the 5V TX and RX an Arduino requires for communication. You can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.

It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).

Arduino®
to be confirmed
A000024
Weight: kg

Arduino Ethernet Shield 2 (without PoE)

Web Offer Price
   Module: Pre-assembled
new 

 New - Awaiting due date 

The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet.

The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. It supports up to eight simultaneous socket connections. Use the Ethernet library to write sketches that connect to the Internet using the Shield. The Ethernet Shield 2 connects to an Arduino Board using long wire-wrap headers extending through the Shield. This keeps the pin layout intact and allows another Shield to be stacked on top of it.

The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO Board. This version of the shield does not come with a Power of Ethernet (PoE) module.

Note: The Ethernet Shield 2 is, at present time, not compatible with the Arduino Zero Pro Board.

Arduino®
1-5 Days
A000043

Arduino GSM Shield with Antenna A000043

Web Offer Price
   Module: Pre-assembled
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Arduino®
1-5 Days
A000053

Arduino Micro A000053

Web Offer Price
   Module: Pre-assembled
The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analogue inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

Arduino®
1-5 Days
A000057

Arduino Leonardo with Headers A000057

Web Offer Price
   Module: Pre-assembled
The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

This version of the Leonardo board is supplied WITH Headers

Arduino®
1-5 Days
A000058

Arduino WiFi Shield with Integrated Antenna A000058

Web Offer Price
   Module: Pre-assembled
The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own circuits. Check out the reference page of the WiFi library to understand how the shield can easily provide an internet connection to your Arduino board.

The WiFi Shield communicates with Arduino using the SPI bus (through the ICSP header), so is compatible with any of the boards that have this type of bus. This version of WiFi shield have an integrated antenna on the PCB, what you have to do is just connect the shield to the Arduino.

Arduino®
1-5 Days
A000059

Arduino USB 2 Serial Converter A000059

Web Offer Price
   Module: Pre-assembled
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an FTDI cable-compatible connector.

It features the Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The USB Serial module has an ISCP interface, allowing you to reprogram the chip when placed in DFU mode. The pin outs on the connector are compatible with a standard FTDI header (as well as the Adafruit and Sparkfun USB-Serial adapters).