Controllers

!
Velleman
5410329363291
1-5 Days
VM137
Weight: kg

Velleman Thermostat Module 5° - 30°C Module VM137

 tick  Module: Pre-assembled
General purpose low-cost thermostat with NTC temperature sensor. Output relay with LED indicator.
Velleman
5410329398354
1-5 Days
VM138
Weight: kg

Velleman DMX Controlled Relay Module VM138

 tick  Module: Pre-assembled
This unit allows you to control a relay by means of the well-known DMX512 protocol. This protocol was developed by USITT in 1986 to control dimmers, scanners, moving-head spots and other lighting devices with a simple wiring. In some cases, a simple ON/OFF selection is desired. This is where this VM138 comes in. It is actually a bus-controlled power driver. The relay will be activated when the DMX value of the set channel equals 140 or more and turns off when the value is 120 or less. Together with our K8062/VM116, a computer-controlled automation will be very easy to build.
Velleman
5410329378561
1-5 Days
VM142
Weight: kg

Velleman Mini-Pic Application Module VM142

 tick  Module: Pre-assembled
This application module may seem small but is big in performance - all depends on your programming skills. You can now create your own custom application without the hassle of making the hardware. All the buffered inputs and outputs are ready-made for you. The VM142 module features on-board LED, a relay output and audible warning buzzer. Make your own automation system with this Programmable Logic Controller (PLC) Suitable for home or automotive applications. All you need is one of our programmers like VM134 or K8076
Velleman
5410329376550
1-5 Days
VM144
Weight: kg

Velleman Telephone Ring Detector with Relay output Module VM144

 tick  Module: Pre-assembled
Simply connect in parallel with phone line. Powerful led flashes when phone rings. The unit will feature a relay output if connected to a 12VDC power supply.
Velleman
5410329416737
1-5 Days
VM148
Weight: kg

Velleman Panel Thermostat Module VM148

 tick  Module: Pre-assembled
A small panel mounted thermostat with LED indication, uses 3-wire sensor for accurate indication and control of temperature. Suitable for controlling room or incubator temperatures. Features: general purpose panel mount thermostat, usable for heating or cooling purposes, (central heating, airco, incubator,… ), separate output-ON and output-OFF setting (hysteresis), direct manual temperature adjustment, bright red LED read-out, comes with easy board-to-wire connectors and sensor (20cm wire), calibrate option, under- and overflow indication
Dimensions: 67 x 40.5mm
Power Supply: 9-12Vdc, <70mA
Velleman
5410329418311
1-5 Days
VM163
Weight: kg

Velleman Panel Clock Module VM163

 tick  Module: Pre-assembled
LED display panel clock for universal use. The clock features an "alarm" output which could be used to switch a light or similar appliance on or off. It also has an option to turn off the display for "in car" or to save battery life.
Velleman
5410329428662
1-5 Days
VM179
Weight: kg

Velleman Proximity Card Reader Module VM179

 tick  Module: Pre-assembled
A simple module which has many applications, security systems in homes and offices or entry and exit door control. Using RFID technology a relay can be activated when card or fob is in close proximity (100mm) to the detection coil. Supplied with two cards, other cards and key fob style actuator is also available.
Dimensions: 66 x 62 x 20mm
Power Supply: 12Vdc 100mA
Velleman
5410329576486
1-5 Days
VM8201
Weight: kg

Velleman Velleman Stand alone 3D Printer Controller Module VM8201

New - Now Available

 tick  Module: Pre-assembled

Fully operate your K8200 3D printer with this module! No computer needed (slicing of 3D object and saving to SD-card still needs to be done on a computer). Use the VM8201 to print .GCODE files that are saved on a regular SD-card (SD-card NOT INCLUDED). Encoder based control. Real time temperature display and control of the extruder and heated bed temperature. Connected to the K8200 controller board with the included flat cable, no extra power supply needed. Enclosure .STL file available from support section of this website. Fully assembled and tested unit. Connection cable requires soldering.

Dimensions: 80 x 50 x 45mm
Power Supply: via K8200